Home
S421T - Wedge Socket
S421T - Wedge Socket

S421T11-13 mm 1035009

Cod:1035009
Adauga in cos
534.04 Lei(TVA inclus) 
Ultima bucata in stoc   448.77 Lei(96.20 EURO)(fara TVA) 
Valoare TVA: 85.27 Lei 

Informatii:

e-mail: comenzi@totalrace.ro
telefon: 0728 305 610
orar: luni-vineri 09:00 - 18:00

Wire Rope Dia. S-421T Stock. No. Dimensions (mm)
mm* in. A B C D G H J* K* L P R S T U V
9-10 3/8 1035000 145 69,1 20,6 20,6 35,1 77,7 198 47,8 22,4 39,6 11,2 54,1 11,2 31,8 35,1
11-13 1 / 2 1035009 175 88,1 25,4 25,4 41,1 95,5 226 32 26,9 49,3 12,7 65 13,5 44,5 47,8
14-16 5/8 1035018 210 109 31,8 30,2 53,8 114 273 50,5 31,0 57,2 14,2 82,6 17,5 51 55,5
18-19 3 /4 1035027 251 130 38,1 35,1 62 134 314 61,2 35,6 66,8 16,8 92,2 19,8 59,5 65
20-22 7/8 1035036 286 149 44,5 41,4 68,5 156 365 63 42,4 79,5 19,1 109 22,4 68,5 74,5
24-26 1 1035045 325 161 51 51 74,7 177 414 77,2 51,0 95,5 22,4 119 26,2 73 83,5
28 1-1/ 8 1035054 365 176 57 57 84 194 466 65 57,0 108 25,4 138 27,9 82,6 90,5
30-32 1- 1/ 4 1035063 415 222 66,5 63,5 90,5 239 520 74,7 59,5 114 26,9 156 30,2 117 125
* Nominal Note : for intermediate wire rope sizes, use next large size socket.

• Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP
wire rope.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design
factor, proof load and temperature requirements. Importantly, these sockets meet other critical
performance requirements including fatigue life, impact properties and material traceability, not
addressed by ASME B30.26.
• Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules.
1-1-17.7, and ABS Guide for Certification of Cranes.
• Basket is cast steel and individually magnetic particle inspected.
• Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed
swage and spelter sockets.
• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out”
of the wedge.
• Eliminates the need for an extra piece of rope, and is easily installed.
• The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue.
• The tail, which is secured by the base of the clip and the wedge, is left undeformed and available
for reuse.
• Incorporates Crosby’s patented QUIC-CHECK®
 “Go” and “No-Go” feature cast into the wedge.
The proper size rope is determined when the following criteria are met:
1) The wire rope should pass thru the “Go” hole in the wedge.
2) The wire rope should NOT pass thru the “No-Go” hole in the wedge.
• Utilizes standard Crosby Red-U-Bolt®
 wire rope clip.
• The 9-10mm through 28mm standard S-421 wedge socket can be retrofitted with the new style
TERMINATOR™ wedge.
• Available with Bolt, Nut, and Cotter Pin.
• U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
• Meets the performance requirements of EN 13411-6: 2003