Home
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140
Cheie tachelaj / Gambeti / Shackles model G2140

G2140 WLL=21 tone

Cod:1021092
Adauga in cos
716.32 Lei(TVA inclus) 
Produs cu termen de livrare.   601.95 Lei(129.00 EURO)(fara TVA) 
Valoare TVA: 114.37 Lei 

Informatii:

e-mail: comenzi@totalrace.ro
telefon: 0728 305 610
orar: luni-vineri 09:00 - 18:00

  • Marca : Crosby®
  • Chei de tachelaj model G 2140 tip omega marca Crosby, cheie tachelaj cu bolt, piulita si stift de blocare
  • Capacitate 21 tone , Stock No. 1021092
  • Cheile de tachelaj sunt stantate cu numele producatorului Crosby sau cu initialele CG (CG reprezinta Crosby Group)
  • Tratament :  Calire si Revenire
  • Partea arcuita din otel aliat, boltul filetat din otel aliat
  • Intre 30 tone metru si 175 tone metru sunt fabricate din otel aliat forjat si intre 200 tone metru si 400 tone metru sunt fabricate din otel aliat turnat. Indeplinesc cerintele de performanta ale cheilor de tachelaj Grad 8.
  • Capacitatea  Limita de Lucru (W.L.L.) este  marcata permanent pe fiecare cheie.
  • Partile arcuite ale cheilor de tachelaj cu capacitati de 30, 40, 55 si 85 tone metru sunt disponibile in varianta galvanizata sau culoare naturala cu bolturi  galvanitate sau vopsite rosu.
  • Partile arcuite ale cheilor de tachelaj cu capacitati de 200, 250, 300 si 400 tone metru sunt Dimetcote® sau culoare naturala cu bolturi  galvanitate sau vopsite rosu.
  • Toate dimensiunile sunt ECHIPATE RFID.
  • Temperatura de utilizare: intre -40 grade C (-40 grade F) pana la 204 grade C (400 grade F).
  • Cheile de tachelaj sunt Calite si Temperate si indeplinesc cerintele de impact DNV de 42 Jouli (31 ft-lbs.) la -20 grade C (-4 grade F).
  • Toate dimensiunile sunt testate individual de proba cu o sarcina de 2 ori mai mare decat Capacitatea Limita de Lucru.
  • Consultati pagina 85 din Catalogul Crosby pentru chei de tachelaj Crosby COLD TUFF® care indeplinesc cerintele suplimentare ale normelor DNV pentru certificarea aplicatiilor de ridicare – Mecanisme Libere (Loose Gear).
  • Cheile de tachelaj de 200 tone metru si mai mari sunt furnizate dupa cum urmeaza
    • Arc si bolt inseriat
    • Certificat de Material (Chimic)
    • Inspectate cu Particule Magnetice
    • Certificatele trebuie solicitate in momentul comenzii.
  • Indeplinesc sau depasesc toate cerintele ASME B30.26 inclusiv cerintele de identificare, ductilitate, factorul de proiectare, sarcina de proba si temperatura. Foarte important, aceste chei de tachelaj satisfac alte cerinte esentiale de performanta incluzand proprietatile de impact si trasabilitatea materialelor, care nu sunt abordate de catre ASME B30.26.
  • Aprobare de Tip si certificare in conformitate cu (American Bureau of Shipping) ABS 2006 Steel Vassel Rules 1-1-17.7 si Ghidul ABS pentru Certificarea Macaralelor.
  • Cautati Boltul Rosu / Red Pin® . . . marca autenticitatii calitatii Crosby

 

Nominal Shackle Size (in.) Working Load Limit (t)* Stock No. G-2140 Weight Each (kg) Dimensions ( mm ) Tolerance +/-
A B C D+/-.5 E F G H J K L A E
3/8 2 1021015 0,15 16,8 23,1 9,7 11,2 36,6 9,7 45,2 55,1 63,2 26,2 9,7 1,5 3,3
7/16 2 2/3 1021020 0,22 19,1 26,9 11,2 12,7 42,9 10,4 51,6 63,8 73,9 29,5 11,2 1,5 3,3
1/2 3 1/3 1021029 0,36 20,6 30,2 12,7 16,3 47,8 11,7 58,7 71,1 83,3 33,3 12,7 1,5 3,3
5/8 5 1021038 0,76 26,9 38,1 17,5 19,6 65 14,7 74,7 90,4 106,4 42,9 16 1,5 3,3
3/4 7 1021047 1,23 31,8 46 20,6 22,6 71,4 17,5 88,9 154 126,2 50,8 19,1 1,5 6,4
7/8 9 1/2 1021056 1,79 36,6 53,1 24,6 25,9 84,1 20,6 102,4 122,4 148,1 57,9 22,4 1,5 6,4
1 12 1/2 1021065 2,57 42,9 65 26,9 29,2 95,3 23,4 119,1 136,9 166,6 68,3 25,4 1,5 6,4
1 1/8 15 1021074 3,75 46 68,3 31,8 31,8 108 26,4 131,1 149,9 189,7 73,9 28,7 1,5 6,4
1 1/4 18 1021083 5,31 51,6 76,2 35,1 35,6 119,1 29,5 146,1 169,9 296 82,6 32,8 1,5 6,4
1 3/8 21 1021092 7,18 57,2 84,1 38,1 38,9 133,4 32,5 162,1 183,1 232,7 92,2 36,1 3,3 6,4
1-1/2 30 1021110 8,52 60,5 91,9 41,1 41,4 146 35,3 175 196 254 98,6 38,9 3,3 6,4
1-3/4 40 1021138 15,4 73,2 106 57,2 50,8 178 44,5 224 237 313 127 46,7 3,3 6,4
2 55 1021156 23,6 82,6 122 61 57,2 197 50,8 258 264 347 146 52,8 3,3 6,4
2-1/2 85 1021174 43,5 105 148 79,2 69,9 267 66,5 324 345 455 184 68,8 6,4 6,4
3 120 1021192 81 128 165 92,2 82,6 330 76,2 371 384 546 200 79,2 6,4 6,4
3-1/2 † 150 1021218 120 133 203 111 95,3 372 95,3 432 448 632 229 91,9 6,4 6,4
4 † 175 1021236 153 140 229 116 108 468 102 457 517 652 254 102 6,4 6,4
7** †400 1021478 500 210 356 184 178 572 165 660 728 1022 330 152 6,4 6,4
*Note:Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit On 200 thru 400 metric Tons. For sizes 30 thru 175 metric tons , Minimum Ultimate Load is 5,4 times the Working Load Limit. ** Cast Alloy Steel.† Furnished with Round Head Bolts with an eyebolt for handling.For Working Load Limit reduction due to side loading applications.
  • INFORMATII GENERALE
  • Quenched and Tempered.
  • Alloy bows, Alloy bolts.
  • Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons. Meets performance requirements of Grade 8 shackles.
  • Working Load Limit is permanently shown on every shackle.
  • 30, 40, 55, and 85 metric ton shackle bows are available galvanized or self colored with pins that are galvanized and painted red.
  • 120, 150, 175 metric ton shackle bows are hot-dip galvanized; pins are Dimetcoted ® and painted red.
  • 200, 250, 300 and 400 metric ton shackle bows are Dimetcoted®; pins are Dimetcoted®a nd painted red.
  • All sizes are RFID EQUIPPED.
  • Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F).
  • Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft-lbs.) at -20 degree C (-4 degree F).
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Refer to page 85 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - Loose Gear.
  • Shackles 200 metric tons and larger are provided as follows.
  • Serialized Pin and Bow
  • Material Certification (Chemical)
  • Magnetic Particle Inspected.
  • Certification must be requested at time of order.
  • Meets or exceeds all requirements of ASME B30.26 including identification,ductility, design factor, proof load and temperature requirements.
  • Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Type Approval and certification in accordance with ABS 2006 Steel Vessel
  • Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
  • Look for the Red Pin®. . . the mark of genuine Crosby quality.