G2130CT 4.75 toneCod:1260568 |
|
Precomanda | 958.56 Lei(TVA inclus) |
Produs cu termen de livrare. | 805.51 Lei(170.00 EURO)(fara TVA) |
Valoare TVA: 153.05 Lei | |
Informatii: |
e-mail: comenzi@totalrace.ro telefon: 0728 305 610 orar: luni-vineri 09:00 - 18:00 |
- Marca: Crosby®
- Capacitate 4.75 tone
- Factor de siguranta: MBL = 5,4 x WLL
- In conformitate cu: cerintele de performanta ale Fed. Spec. RR-C271D tip IVA, grad A, Clasa 3.
- Cheile de tachelaj "COLD TUFF" sunt potrivite pentru utilizare la - 50 º F
- Forjat - Calit si Temperat, cu bolt aliat : G 2130 CT - Otel Carbon
- Chei de tachelaj model G 2130CT si G 2140CT tip omega marca Crosby, cheie tachelaj cu bolt, piulita si stift de blocare
- Capacitatea stantata permanent pe shackles.
- Inseriate individual cu Certificare.
- Finisare cu grund de zinc anorganic sau galvanitate la cald.
- Inspectate individual cu particule magnetice cu Certificare.
- Cheile de tachelaj de 25 Tone si mai mari sunt Echipate RFID
- Cheile de tachelaj sunt stantate cu numele producatorului Crosby sau cu initialele CG (CG reprezinta Crosby Group)






- INFORMATII GENERALE
- Forged - Quenched and Tempered, with alloy bolt.
- G-2130CT - Carbon Steel
- G-2140CT - Alloy Steel
- Working Load Limit permanently shown on every shackle.
- Individually Serialized with Certification.
- Fatigue Rated (G-2130CT only).
- Shackles 25t and larger are RFID EQUIPPED.
- All sizes are individually proof tested to 2.0 times the Working Load Limit.
- Finish is Inorganic Zinc Primer or Hot Dipped Galvanized.
- Bow and Bolt are Certified to meet charpy impact testing of 42 joules (31 ft-Ibs.) min. ave. at -20 degree C (-4 degree F).
- Individually Mag Inspected with certification.
- Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV OS-101 and are produced in accordance with DNV MSA requirements, including required documents.
- COLD TUFF® shackles are suitable for use to -50° F.
- Bolt Type Anchor shackle with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal
- Specification RR-C-271F Type IVA, Grade A, Class 3, except for those provisions required of the contractor