Home
Cheie tachelaj / Gambeti / Shackles model G2130A Crosby®
Cheie tachelaj / Gambeti / Shackles model G2130A Crosby®
Cheie tachelaj / Gambeti / Shackles model G2130A Crosby®
Cheie tachelaj / Gambeti / Shackles model G2130A Crosby®
Cheie tachelaj / Gambeti / Shackles model G2130A Crosby®

G2130A WLL=9.5 tone

Cod:1219578
Adauga in cos
282.05 Lei(TVA inclus) 
Produs cu termen de livrare.   237.02 Lei(51.00 EURO)(fara TVA) 
Valoare TVA: 45.03 Lei 

Informatii:

e-mail: comenzi@totalrace.ro
telefon: 0728 305 610
orar: luni-vineri 09:00 - 18:00

  •     Marca : Crosby®
  •     Chei de tachelaj model G 2130A - GRAD 80 tip omega marca Crosby, cheie tachelaj cu bolt, piulita si stift de blocare
  •     Capacitate 9.5 tone
  •     In conformitate cu: EN 13889:2003 si indeplinesc cerintele de performanta ale Fed. Spec. RR-C271D tip IVA, grad A, Clasa 3.
  •     Factor siguranta: MBL = 8 x WLL (Sarcina maxima lucru)
  •     Cheie tachelaj: Forjat - Calit si Temperat
  •     Material otel aliat
  •     Galvanizata la cald
  •     Capacitatea stantata permanent pe shackles.
  •     Cheile de tachelaj sunt stantate cu numele producatorului Crosby sau cu initialele CG (CG reprezinta Crosby Group)
Nominal Size (in.) Working Load Limit (t)* G2130A Stock No. Weight Each (kg) Dimensions (mm) Tolerance +/-
A B C D E F H L N C A
1 / 2 2 1219472 0,36 20,6 16 47,8 12,7 33,3 30,2 83,5 58,5 12,7 3,30 1,50
5/8 3-1/4 1219491 0,62 26,9 19,1 60,5 16 42,9 38,1 106 74,5 17,5 6,35 1,50
3 / 4 4-3/4 1219516 1,23 31,8 22,4 71,5 19,1 51 46 126 89 20,6 6,35 1,50
7/8 6-1/2 1219534 1,79 36,6 25,4 84 22,4 58 53 148 102 24,6 6,35 1,50
1 8-1/2 1219552 2,28 42,9 28 95,5 25,4 68,5 60,5 167 119 26,9 6,35 1,50
1-1/8 9-1/2 1219578 3,75 46 31,8 108 28,7 74 68,5 190 131 31,8 6,35 1,50
1-1/4 12 1219598 5,31 51,5 35,1 119 31,8 82,5 76 210 146 35,1 6,35 1,50
1-3/8 13-1/2 1219614 7,18 57 38,1 133 35,1 92 84 233 162 38,1 6,35 3,30
1-1/2 17 1219632 8,62 60,5 41,4 146 38,1 98,5 92 254 175 41,1 6,35 3,30
*NOTE: Maximum Proof Load is 2,0 times the Working Load Limit. Minimum Ultimate Strength is 8 times the
Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 91.

INFORMATII GENERALE
Capacities 2 to 17 metric tons.
Working Load Limit permanently shown on every shackle.
Forged Alloy Steel – Quenched and Tempered, with bow and bolt.
Hot Dip galvanized.
Shackles can be RFID EQUIPPED.
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
Type Approval and certification in accordance with DNV Type Approval under DNV 2.7-1.
Shackles are Quenched and Tempered and meets DNV impact requirements of 42 joules (31 ft. Ibs.) at -40 degree C (-40 degree F).
Bolt Type Anchor shackles with thin head bolt – nut with cotter pin.
Meets the performance requirements of Federal
Specification RR-C-271F Type IVA, Grade B, Class 3, except for those provisions required of the contractor.